Hi,
I am trying to get a fairly cheap and generic Hp receiver/transceiver to work with LIRC and ubuntu 10.4. I don't feel I am that far off getting something to happen, I am just at my wits end with this.
The transceiver is ostensibly a USB Hewlett Packard TSGI-IR01, in Windows it appears as an "eHome Infared Transceiver". In other Linux distributions is has been listed as a Fintek IR receiver. I don't know if that difference implies a cheap knock off or not. I have been trying both a Logitech 525 remote (with appropriate Windows Media Center configuration) and a generic WMC remote with the receiver. The receiver flashes when I press buttons on a remote, so I know it is physically working.
I get no response after trying irw, and irrecord -d /dev/lirc test gives the following response
Code:
irrecord: could not get file information for /dev/lirc
irrecord: default_init(): No such file or directory
irrecord: could not init hardware (lircd running ? --> close it, check permissions)
lsusb gives the following. 1934:5168 is the (Fintek) reciever.
Code:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 1934:5168
Bus 002 Device 002: ID 07d1:3c07 D-Link System Wireless G DWA-110 Adapter
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsmod | fgrep "lirc" gives me
Code:
lirc_mceusb 12068 0
lirc_dev 8890 1 lirc_mceusb
No /dev/lirc0? I think there is a big problem here.
Here are some of my conf. files
hardware.conf
Code:
GNU nano 2.2.2 File: /etc/lirc/hardware.conf
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Windows Media Center Transceivers/Remotes (all)"
REMOTE_MODULES="lirc_dev lirc_mceusb"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_LIRCD_CONF="mceusb/lircd.conf.mceusb"
REMOTE_LIRCD_ARGS=""
#Chosen IR Transmitter
TRANSMITTER="Microsoft Windows Media Center V2 (usb) : Direct TV Receiver"
TRANSMITTER_MODULES="lirc_dev lirc_mceusb2"
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE="/dev/lirc1"
TRANSMITTER_LIRCD_CONF="directtv/general.conf"
TRANSMITTER_LIRCD_ARGS=""
#Enable lircd
START_LIRCD="true"
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
LOAD_MODULES="true"
# Default configuration files for your hardware if any
LIRCMD_CONF=""
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
REMOTE_SOCKET=""
TRANSMITTER_SOCKET=""
START_LIRCMD=""
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
lirc.conf
Code:
This configuration has been automatically generated via
#the Ubuntu LIRC package maintainer scripts.
#
#It includes the default configuration for the remote and/or
#transmitter that you have selected during package installation.
#
#Feel free to add any custom remotes to the configuration
#via additional include directives or below the existing
#Ubuntu include directives from your selected remote and/or
#transmitter.
#Configuration for the Windows Media Center Remotes (new version Philips et al.) remote:
include "/usr/share/lirc/remotes/mceusb/lircd.conf.mceusb"
#
# brand: HP
# model no. of remote control: TSGH-IR01
# devices being controlled by this remote: HP Slimline S3100y
#
# Derived from MCEUSB2 lircd.conf file (lircd.conf.mceusb) found at:
# https://help.ubuntu.com/community/Install_Lirc_Feisty
#
# RC-6 config file
#
# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
# http://home.hccnet.nl/m.majoor/pronto.pdf
#
# used by: Philips
#
#########
#
# Philips Media Center Edition remote control
# For use with the USB MCE ir receiver
#
# Dan Conti dconti|acm.wwu.edu
#
# Updated with codes for MCE 2005 Remote additional buttons
# *, #, Teletext, Red, Green, Yellow & Blue Buttons
# Note: TV power button transmits no code until programmed.
# Updated 12th September 2005
# Graham Auld - mce|graham.auld.me.uk
#
# Radio, Print, RecTV are only available on the HP Media Center remote control
#
#
# Updated with codes for MCE 2007 Remote additional buttons
# Visualization, Aspect, SlideShow, Eject
# Note:
# Renamed some buttons: DVD->DVDMenu, More->MoreInfo, Star->Asterisk, Hash->Pound
# Note:
# Blue, Yellow, Green, Red, and Teletext buttons do not exist on the HP remote
begin remote
name mceusb
bits 16
flags RC6|CONST_LENGTH
eps 30
aeps 100
header 2667 889
one 444 444
zero 444 444
pre_data_bits 21
pre_data 0x37FF0
gap 105000
toggle_bit 22
rc6_mask 0x100000000
begin codes
#unused by HP remote
Blue 0x00007ba1
Yellow 0x00007ba2
Green 0x00007ba3
Red 0x00007ba4
Teletext 0x00007ba5
#ba6 - bae unused
BA6 0x00007ba6
BA7 0x00007ba7
BA8 0x00007ba8
BA9 0x00007ba9
BAA 0x00007baa
BAB 0x00007bab
BAC 0x00007bac
BAD 0x00007bad
BAE 0x00007bae
Radio 0x00007baf
Print 0x00007bb1
#bb2 - bb4 unused
BB2 0x00007bb2
BB3 0x00007bb3
BB4 0x00007bb4
Videos 0x00007bb5
Pictures 0x00007bb6
RecTV 0x00007bb7
Music 0x00007bb8
TV 0x00007bb9
#bba - bbf unused
BBA 0x00007bba
BBB 0x00007bbb
BBC 0x00007bbc
BBD 0x00007bbd
BBE 0x00007bbe
BBF 0x00007bbf
#bc1 - bca unused
BC1 0x00007bc1
BC2 0x00007bc2
BC3 0x00007bc3
BC4 0x00007bc4
BC5 0x00007bc5
BC6 0x00007bc6
BC7 0x00007bc7
BC8 0x00007bc8
BC9 0x00007bc9
BCA 0x00007bca
Eject 0x00007bcb
SlideShow 0x00007bcc
Visualization 0x00007bcd
#bce - bcf unused
BCE 0x00007bce
BCF 0x00007bcf
#bd1 - bd7 unused
BD1 0x00007bd1
BD2 0x00007bd2
BD3 0x00007bd3
BD4 0x00007bd4
BD5 0x00007bd5
BD6 0x00007bd6
BD7 0x00007bd7
Aspect 0x00007bd8
Guide 0x00007bd9
LiveTV 0x00007bda
DVD 0x00007bdb
#NoGap
Back 0x00007bdc
OK 0x00007bdd
Right 0x00007bde
Left 0x00007bdf
Down 0x00007be0
Up 0x00007be1
#NoGap
Star 0x00007be2
Hash 0x00007be3
#NoGap
Replay 0x00007be4
Skip 0x00007be5
Stop 0x00007be6
Pause 0x00007be7
Record 0x00007be8
Play 0x00007be9
Rewind 0x00007bea
Forward 0x00007beb
#NoGap
ChanDown 0x00007bec
ChanUp 0x00007bed
VolDown 0x00007bee
VolUp 0x00007bef
#NoGap
More 0x00007bf0
Mute 0x00007bf1
Home 0x00007bf2
Power 0x00007bf3
#NoGap
Enter 0x00007bf4
Clear 0x00007bf5
#NoGap
Nine 0x00007bf6
Eight 0x00007bf7
Seven 0x00007bf8
Six 0x00007bf9
Five 0x00007bfa
Four 0x00007bfb
Three 0x00007bfc
Two 0x00007bfd
One 0x00007bfe
Zero 0x00007bff
end codes
end remote
I am only too happy to provide more information if asked.
Bookmarks